GeoLock™ Wall Anchor System in Combined Locks, WI
Making Our Clients Satisfied!
What Your Neighbors Are Saying About Us
GET IN TOUCH
Permanent Foundation Wall Stabilization with Advanced Anchoring Technology
Foundation walls can develop cracks, bowing, or tilting due to hydrostatic pressure, expansive soils, and poor drainage. If not repaired, these problems can lead to structural instability, basement water intrusion, and expensive foundation damage.
At Combined Locks Foundation Repair, we offer the GeoLock™ Wall Anchor System, a powerful and effective solution for stabilizing and straightening foundation walls. GeoLock™ wall anchors provide long-term reinforcement by anchoring foundation walls to stable soil outside the home, preventing further bowing and movement. This system is engineered for durability and is one of the most reliable foundation wall repair methods available.
Our Services
- Concrete Slab Foundation Repair
- Pier and Beam or Block and Base Foundation Repair
- Basement Wall Repair
- Basement Waterproofing
- Cracked Wall / Structural Repair
- Drainage Services and Repair
- House Raising / Lifting
- House Leveling
- Retaining Wall Repair
- Polyurethane Foam Injection
- Commercial Foundation Repair
- Void Filling
- Steel Push Pier Installation
- Slab Pier Installation
- Helical Pier Installation
- Helical Deck Pier Installation
- Pre-Construction Pier Installation
- Foundation Wall Repair
- EverBrace™ Wall Restoration System
- CarbonArmor Wall Stabilization
- GeoLock Wall Anchor System
- PowerBrace Foundation Wall Support

How the GeoLock™ Wall Anchor System Works
GeoLock™ wall anchors permanently stabilize failing foundation walls using a multi-step anchoring process. Our comprehensive installation process includes:
1. Foundation Wall Assessment and Soil Evaluation
- A thorough inspection of foundation wall cracks, bowing, or leaning.
- Identification of soil conditions and external pressure causing wall movement.
- A customized GeoLock™ wall anchor placement plan based on the severity of movement.
2. GeoLock™ Wall Anchor Installation Process
Exterior Soil Anchor Installation
- Steel anchor plates are embedded deep in stable soil outside the foundation.
- Anchors are placed far enough from the foundation to provide strong resistance against soil pressure.
Interior Wall Plate and Steel Rod Installation
- A small hole is drilled through the foundation wall, allowing a steel rod to connect the exterior anchor plate to an interior wall plate.
- The system is tightened to slowly pull the bowing wall back into place, reinforcing the foundation.
3. Final Adjustments and Long-Term Reinforcement
- The anchor system can be adjusted over time, gradually straightening the wall.
- A final inspection ensures proper stabilization and structural security.

Benefits of the GeoLock™ Wall Anchor System
GeoLock™ wall anchors offer one of the strongest and most durable foundation stabilization solutions available:
✔ Permanently Stops Wall Bowing and Tilting – Transfers the wall’s weight to deep, stable soil, preventing further movement.
✔ Gradual Straightening Over Time – The system allows for adjustments to realign the wall back to its original position.
✔ Minimal Disruption to Property – Only small holes are needed for anchor rod placement, reducing mess and disturbance.
✔ Works in Various Soil Conditions – Effective in clay, sand, and other expansive soils.
✔ Long-Term Durability – Built with galvanized steel to resist corrosion and maintain strength for decades.
Unlike temporary fixes, GeoLock™ provides a permanent solution that reinforces structural integrity for life.

What to Expect During GeoLock™ Wall Anchor Installation
Our step-by-step process ensures a smooth and effective repair experience:
* Step 1: A detailed foundation wall evaluation to determine anchor placement.
* Step 2: Excavation of small exterior anchor holes in stable soil.
* Step 3: Installation of steel anchor plates and rods connecting to the foundation wall.
* Step 4: Gradual tightening of anchors, pulling the wall back into alignment.
* Step 5: Final inspection and adjustments for long-term stability.
The GeoLock™ system is engineered for immediate stabilization, with gradual improvements in wall straightening over time.

Cost of GeoLock™ Wall Anchor System in Combined Locks, WI
The cost of installing the GeoLock™ Wall Anchor System depends on multiple factors:
- Extent of wall damage – More severe bowing may require additional anchors.
- Number of anchors needed – The larger the affected area, the more anchors are required.
- Soil conditions and anchor depth – Softer soils may require deeper anchor placement.
- Property accessibility – Hard-to-reach foundation areas may require extra labor or equipment.
* Typical GeoLock™ installation costs range from $3,500 to $12,000, but a free on-site inspection provides an exact estimate.
FAQs About the GeoLock™ Wall Anchor System
1. How long does GeoLock™ installation take?
Most installations are completed within one to two days, with minimal disruption to your home.
2. Will GeoLock™ wall anchors straighten my foundation walls?
Yes, GeoLock™ can gradually straighten bowing walls over time with periodic adjustments.
3. Can GeoLock™ be used in finished basements?
Yes, the system can be installed without disrupting drywall or finished walls.
4. Does GeoLock™ require exterior excavation?
Yes, small anchor holes are needed in stable soil outside the foundation.
Looking for GeoLock™ Wall Anchor System Installation Near Me?
At Combined Locks Foundation Repair, we provide expert GeoLock™ wall anchor installation services in Combined Locks, WI. If your foundation walls are bowing, leaning, or cracking, contact us today for a free inspection and reinforcement estimate.